-
Monday - Saturday 10 AM to 6 PM
MS Billets. BIS-Certified. Continuous-Cast.
500 tonnes per day. IS 2830:2012 certified. Licence No. CM/L-6600074814.
What Are MS Billets?
MS (Mild Steel) billets are semi-finished, continuously cast steel blocks with a square or rectangular cross-section. They are the primary raw material used to manufacture finished steel products like TMT bars, wire rods, structural sections and pipes.
Billets are produced by pouring liquid steel from an induction or electric arc furnace through a continuous casting machine – which solidifies the steel into a long strand that is then cut to required lengths. The continuous casting process produces a refined, uniform grain structure that gives the downstream rolled product its strength and consistency.
Technical Specifications
| Parameter | Specification |
|---|---|
| BIS Standard | IS 2830:2012 |
| BIS Licence Number | CM/L-6600074814 |
| Production Capacity | 500 TPD |
| Chemical Composition | Carbon, Manganese, Silicon, Sulphur, Phosphorus – all within IS 2830 limits |
| Mechanical Properties | Tensile strength, yield strength, density 7.85 g/cm3, moderate elongation – all to industry standard |
| Cross Section | Square with rounded corners (size, length and dimensional tolerance to final product requirement) |
| Process | Continuous Cast through induction furnace route – refined, uniform grain structure |
| Defects | Zero piping, no pinholes, no cracks (Zero Failure Certificate on file) |
Our Billet Production Process
Apple Industries Limited produces MS billets through the integrated induction furnace route – one of the cleanest, most controlled methods of producing semi-finished steel.
Two induction furnaces operate in parallel, charged with a calibrated mix of:
The liquid steel is poured through a continuous caster, producing billets with a uniform, refined grain structure – the structural foundation that gives downstream TMT bars their tensile and yield strength.
Where Our Billets Go ?
Apple Industries Limited MS billets are used as primary input for:
Captive consumption in our own rolling mill – producing TMT bars in Fe 500 / Fe 500D / Fe 550D grades
External re-rolling mills and TMT manufacturers – we are open to discussing supply with verified industrial buyers
Why Procurement Engineers Choose Our Billets
- BIS-licensed (CM/L-6600074814) for IS 2830:2012 – non-negotiable for any project that demands certified inputs
- Controlled chemistry – because we control the upstream sponge iron too
- Zero piping, zero pinholes, zero cracks – documented in our Zero Failure Certificate
- Continuous-cast for uniform grain structure – which translates directly into TMT bar performance
- 500 TPD reliable production – no interruption from raw material shortages
FREQUENTLY ASKED QUESTIONS
Are Apple Industries Limited MS Billets BIS certified?
Yes. Apple Industries Limited holds an active BIS licence (CM/L-6600074814) for MS Billets under IS 2830:2012 – the Indian Standard for cast billets, blooms and slabs used for rolling. The licence is valid and verifiable through BIS.
What is the minimum order quantity for MS Billets?
The minimum order quantity is 25 tonnes. Standard lead time from order confirmation to dispatch is 24 hours. Transport arrangements can be coordinated based on the customer’s preference – factory ex-works pickup, or delivered to the customer’s facility.
Can we customise billet dimensions?
Yes. Apple Industries produces billets in square cross-section with rounded corners. Specific size, length and dimensional tolerance can be discussed based on your downstream rolling requirement. Contact our sales team for a technical discussion.
Fill The Form Below
Need MS billets for your rolling mill?
Integrated steel manufacturer in South India. Sponge iron, MS billets and German-Thermex TMT bars from our 82.96-acre Anantapur plant since 2010.
Contact Info:
-
Address: SY No 354, Village - D. Hirehal, District - Ananthpur , Andhra Pradesh - 515872.
-
Phone: 1800-203-4123